- Fuel Tank (see Fuel System chapter)
- Pickup Coil Lead Connector [A]
Set the hand tester [B] to the x 100 Ω range and using two auxiliary wires, connect it to the black lead [C] and blаск/yellow lead [D] in the connector [А].
Special Tool - Hand Tester: 57001-1394
★ If there is more resistance than the specified value, the coil has an open lead and must be replaced. Much less than this resistance means the coil is shorted, and must be replaced.
Pickup Coil Resistance: 452-462 Ω
Using the highest resistance range of the tester, measure the resistance between the pickup coil leads and chassis ground.
★ Any tester reading less than infinity (x) indicates a short, necessitating replacement of the pickup coil assembly.