Warning! Gasoline is extremely flammable and can be explosive under certain conditions. Turn the ignition switch OFF. Do not smoke. Make sure the area is well-ventilated and free from any source of flame or sparks; this includes any appliance with a pilot light.
Remove the carburetor, and drain the fuel into a suitable container.
Remove the float bowl.
Slide out the pivot pin [A] with a suitable tool [B], and remove the float [C] and float valve needle [D].
![](https://motoinstruction.ru/img/kawasaki/5/113235.jpg)
Bend the tang [A] on the float arm very slightly to change the float height. Increasing the float height lowers the fuel level and decreasing the float height raises the fuel level
![](https://motoinstruction.ru/img/kawasaki/5/113236.jpg)
Float height standard: 7±2 mm
Note. Do not push the needle rod [A] in during the float height measurement [В].
![](https://motoinstruction.ru/img/kawasaki/5/113237.jpg)
Assemble the carburetor, and recheck the fuel level.
★ If the fuel level cannot be adjusted by this method, the float or the float valve [C] is damaged.