| Fault Code | Possible cause | Action |
| P0460 | Fuel level sensor circuit fault | View & note «freeze frame» data if available. View & note «sensor» data. Ensure sensor connector is secure. Disconnect ECM and proceed to pinpoint test 1 |
Pinpoint tests
| Test | Result | Action |
| 1 Check cable and terminal integrity: - ECM pin A24 - ECM pin A06 | OK | Disconnect sensor and proceed to test 2 |
| Faulty | Rectify fault, proceed to test 6 | |
| 2 Check cable for short circuit: - ECM pin A24 to ground | OK | Proceed to test 3 |
| Short circuit | Locate and rectify wiring fault, proceed to test 5 | |
| 3 Check cable continuity: - ECM pin A24 to sensor pin 4 - ECM pin A06 to sensor pin 3 | OK | Proceed to test 4 |
| Open circuit | Locate and rectify wiring fault, proceed to test 5 | |
| 4 Check cable for short circuit: - Sensor pin 3 to sensor pin 4 | OK | Renew fuel level sensor and proceed to test 5 |
| Short circuit | Locate and rectify wiring fault, proceed to test 5 | |
| 5 Reconnect harness, clear fault code. | OK | Action complete, quit test |
| Fault still present | Contact Triumph service |
Circuit diagram
