Removal
Remove:
- Engine Oil (drain, see Engine Lubrication System chapter)
- Shift Pedal (see Shift Pedal Removal)
- Clutch (see Clutch chapter)
- Bolts [A], Oil Pipe Holders [B], Oil Pipe [C] and O-ring
Remove:
- Shift Shaft [A]
- Bolt [B]
- Gear Positioning Lever [C] and Spring
Installation
Install the gear positioning lever [A] as shown, and tighten the bolt.
- Springs [B]
- Collar [C]
- Bolt [D]
Torque - Gear Positioning Lever Bolt: 13 N·m (1.3 kg·m, 113 in·lb)
Tighten the oil pipe holder bolts.
Torque - Oil Pipe Holder Bolts: 13 N·m (1.3 kg·m, 113 in·lb)