Clutch plate assembly — inspection (Kawasaki ZX-6R/ZX-600-J)

0

Inspect the friction plate thickness (see Clutch Plate, Wear, Damage Inspection).

Measure the length [A] of the clutch plate assembly as shown.

Assemble:

• Clutch Hub [B]
• Spring Seat [C]
• Spring [D]
• Friction Plate [E]
• Steel Pile [F]
• Spring Plate [G]
• Springs [H]
• Spring Holders [1]
• Spring Bolts [J]

Torque - Clutch Spring Bolts: 8.8 N·m (0.9 kg·m, 78 in·lb)
Clutch Plate Assembly. Standard: 37.7-38.3 mm

★ If the length is not within the specified range, adjust the length (see Clutch Plate Assembly Adjustment).

See this article in russian language

Clutch — disassembly and assembly Suzuki V-Strom DL-650 (2004-2011)
Clutch assembly — exploded view Triumph Street Triple 765 (2017-2024)
Checking the clutch pressure plate Yamaha FZ1 Fazer (2006-2015)
Clutch — disassembly and assembly, replacement of discs and… Honda CB 400 SF (1992-1999)
Clutch master cylinder and reservoir — removal,… Harley-Davidson V-Rod (2002-2006)

Article about repair motorcycles «Kawasaki ZX-6R ZX600-J» (2000-2002): «Clutch plate assembly — inspection»: https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/engine/transm/111332 <a href="https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/engine/transm/111332">Clutch plate assembly — inspection</a> - article about repair motorcycles «Kawasaki ZX-6R ZX600-J» (2000-2002) from section «Transmission». [url=https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/engine/transm/111332]Clutch plate assembly — inspection[/url] - article about repair motorcycles «Kawasaki ZX-6R ZX600-J» (2000-2002) from section «Transmission».