Headlight, brake light/taillight, license plate light and turn signal light
Headlight
12 V 60/55 W 1
Position light (E-02, 19, 24)
12 V 5 W
Brake light/taillight LED
Licence plate light
12 V 5 W 2
Turn signal/position light (E-03, 28, 33)
12 V 21 W/5 W x 2 3
12 V 21 W x 2 4
Turn signal light (E-02, 19, 24)
12 V 21 W x 4 5
Caution: If you have touched the bulb with your bare hands, clean it with a cloth moistened with alcohol or soapy water to maintain lens clarity.
Headlight relay inspection
Headlight relay is located in front of the battery.
- Remove the right frame side cover. (9-5)
- Remove the headlight relay 1.
First check the insulation between A and B terminals with tester. Then apply 12 volts to C and D terminals, + to C and − to D, and check the continuity between A and B.
If there is no continuity, replace it with a new one.
- 09900-25008: Multi-circuit tester set
- Tester knob indication: Continuity test (•)))
Headlight beam adjustment
- Adjust the headlight beam.
Note: To adjust the headlight beam, adjust the beam horizontally first, then adjust vertically.
А: Horizontal adjuster; В: Vertical adjuster