Remove the brake fluid reservoir cap and diaphragm.
Suck up the old brake fluid as much as possible.
Fill the reservoir with the new brake fluid.
- Specification and Classification: DOT 4
![](https://motoinstruction.ru/img/suzuki/14/120720.jpg)
Connect a clear hose to the caliper air bleeder valve and insert the other end of hose into a receptacle.
Loosen the air bleeder valve and pump the brake lever until old brake fluid flows out of the bleeder system.
Close the caliper air bleeder valve and disconnect a clear hose. Fill the reservoir with the new fluid to the upper mark of the reservoir.
- Brake air bleeder valve: 7.5 N·m (0.75 kgf·m, 5.5 lb·ft)
![](https://motoinstruction.ru/img/suzuki/14/120721.jpg)
Caution!
- Never reuse the brake fluid left over from previous servicing and which has been stored for long periods of time.
- Bleed air from the brake system. (2-25)
![](https://motoinstruction.ru/img/suzuki/14/120722.jpg)