![](https://motoinstruction.ru/img/suzuki/14/120751.jpg)
Loosen the pad mounting pin (2).
Remove the caliper bracket bolt (3).
Caution!
- Do not operate the brake pedal while dismounting the pads.
- Replace the brake pads as a set, otherwise braking performance will be adversely affected.
![](https://motoinstruction.ru/img/suzuki/14/120752.jpg)
Remove the pad mounting pin and brake pads with the rear caliper pivoted up.
Clean up the caliper especially around the caliper pistons.
![](https://motoinstruction.ru/img/suzuki/14/120753.jpg)
Assemble the insulator (4) and shim (5) to the new brake pad (6).
Caution! Replace the brake pads as a set, otherwise braking performance will be adversely affected.
![](https://motoinstruction.ru/img/suzuki/14/120754.jpg)
Install the new brake pads.
![](https://motoinstruction.ru/img/suzuki/14/120755.jpg)
Note: Make sure that the detent of the pad is seated onto the retainer on the caliper bracket.
![](https://motoinstruction.ru/img/suzuki/14/120756.jpg)
Tighten the caliper mounting bolt (7) and pad mounting pin (8) to the specified torque.
- Rear brake caliper mounting bolt: 22 N·m (2.2 kgf·m, 16.0 lb·ft)
- Rear brake pad mounting pin: 17 N·m (1.7 kgf·m, 12.5 lb·ft)
![](https://motoinstruction.ru/img/suzuki/14/120757.jpg)
Install the plug (9) to the specified torque.
- Pad pin plug: 2.5 N·m (0.25 kgf·m, 1.8 lb·ft)
Note: After replacing the brake pads, pump the brake pedal several times in order to operate the brake correctly and then check the brake fluid level.
![](https://motoinstruction.ru/img/suzuki/14/120758.jpg)