Remove the speedometer lead wire mounting bolts (1).
Remove the front fender bolts and brake hose bolts.
Remove the front fender (2).
![](https://motoinstruction.ru/img/suzuki/14/120562.jpg)
Loosen the front fork upper clamp bolts (3).
Note: Slightly loosen the front fork cap bolts (4) before loosening the lower clamp bolts to facilitate later disassembly.
![](https://motoinstruction.ru/img/suzuki/14/120563.jpg)
Loosen the front fork lower clamp bolts.
Note: Hold the front fork by the hand to prevent sliding out of the steering stem.
Remove the front fork.
![](https://motoinstruction.ru/img/suzuki/14/120564.jpg)
Remove the front fork cap bolt (5).
![](https://motoinstruction.ru/img/suzuki/14/120565.jpg)
Remove the spacer (6), washer (7) and spring (8).
![](https://motoinstruction.ru/img/suzuki/14/120566.jpg)
Invert the fork and drain the fork oil out of the fork by stroking.
Hold the fork inverted for a few minutes to drain the fork oil.
![](https://motoinstruction.ru/img/suzuki/14/120567.jpg)
Remove the front axle pinch bolt. (For right front fork reg)
![](https://motoinstruction.ru/img/suzuki/14/120568.jpg)
Remove the damper rod bolt with the special tools.
Remove the damper rod.
- 09940-34520: "T" Handle
- 09940-34531: Attachment A
Note: If the damper rod turns together with the damper rod bolt, temporarily install the fork spring, spacer, washer and cap bolt to prevent the damper rod from turning.
![](https://motoinstruction.ru/img/suzuki/14/120569.jpg)
Remove the rebound spring (9) and cylinder (10).
![](https://motoinstruction.ru/img/suzuki/14/120570.jpg)
Remove the dust seal.
![](https://motoinstruction.ru/img/suzuki/14/120571.jpg)
Remove the oil seal stopper ring.
![](https://motoinstruction.ru/img/suzuki/14/120572.jpg)
Pull the inner tube out of the outer tube.
Note: Be careful not to damage the inner tube.
Caution! The slide metals, oil seal and dust seal must be replaced with the new ones when reassembling the front fork.
![](https://motoinstruction.ru/img/suzuki/14/120573.jpg)
Remove the following parts.
- (11) Oil seal
- (12) Oil seal retainer
- (13) Guide metal
- (14) Slide metal
- (15) Oil lock piece
![](https://motoinstruction.ru/img/suzuki/14/120574.jpg)
Remove the pin (16).
Remove the washer (17).
![](https://motoinstruction.ru/img/suzuki/14/120575.jpg)
Remove the spring adjuster (18) from front fork cap bolt.
![](https://motoinstruction.ru/img/suzuki/14/120576.jpg)