Malfunction code stored in ECM memory can be checked by the special tool.
Before checking malfunction code, read SELF-DIAGNOSIS FUNCTION "USER MODE and DEALER MODE" (4-14, 4-15) carefully to have good understanding as to what functions are available and how to use it.
Be sure to read "PRECAUTIONS for Electrical Circuit Service" (4-2) before inspection and observe what is written there.
Remove the seat. (7-4)
Connect the special tool to the dealer mode coupler at the wiring harness, and start the engine or crank the engine for 4 seconds and more.
Turn the special tool's switch ON and check the malfunction code to determine the malfunction part.
- 09930-82720: Mode select switch
![](https://motoinstruction.ru/img/suzuki/14/120257.jpg)
Note: The dealer mode coupler is located inside of the left frame cover.
![](https://motoinstruction.ru/img/suzuki/14/120258.jpg)
Self-diagnosis reset procedure
After repairing the trouble, turn OFF the ignition switch and turn ON again.
If C00 is indicates, the malfunction codes are cleared.
Disconnect the special tool from the dealer mode coupler.
![](https://motoinstruction.ru/img/suzuki/14/120259.jpg)