Removal
Warning! Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it from falling and causing injury to the operator or damage to the motorcycle.
1. Release the two screws securing each panel to the frame.
1. Infill panel; 2. Withdraw the infill panel
Note: A connector bracket is located behind the infill panel on the left hand side.
Installation
1. Position the left hand engine infill panel to the frame. Align the screw holes in the panel with those in the connector bracket and frame.
2. Fit the screws and tighten to 3 Nm.
3. Repeat for the right hand panel.
Note: There is no connector bracket on the right hand side.