Warning! Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it from falling and causing injury to the operator or damage to the motorcycle.
Rider’s seat
The seat lock is located at the rear of the right hand side cover. To remove the rider’s seat, insert the ignition key into the seat lock and turn it anti-clockwise while pressing down on the rear of the seat. This will release the seat from its lock and allow it to be slid upwards for complete removal from the motorcycle.
Seat lock
To refit the rider’s seat, engage the seat’s tongue under the fuel tank and press down at the rear to engage in the seat lock.
Warning! To prevent detachment of the seat during riding, after fitting always grasp the seat and pull firmly upwards. If the seat is not correctly secured in the lock it will detach from the rear frame. A loose or detached seat could cause loss of motorcycle control and an accident.
Rear seat
Remove the rider’s seat and release the fixings securing the rear seat to the mudguard.
To refit the rear seat, position it to the rear mudguard and tighten the three fixings to 9 Nm. Refit the rider's seat.