Injectors and fuel rail — removal and installation (Triumph Rocket III)
- Main
- Triumph
- Rocket
- Rocket III
- Engine and systems
- Fuel and control system
- Injectors and fuel rail — remo…
Contents: Removal ↓ Assembly/installation ↓
Removal
1. Remove rider's seat.
2. Disconnect the battery, negative (black) lead first.
3. Remove the throttle bodies as described on page 11.122.
4. Remove the three screws securing the fuel rail and fuel hose to the throttle body assembly.
1. Fuel rail; 2. Screws
Note: The fuel rail and injectors are removed from the throttle bodies together.
5. Gently ease the fuel rail and injectors upwards to release them from the throttles.
1. Fuel rail; 2. Injectors
6. Ease the clips from the top of each injector.
1. Clips; 2. Injectors
7. Ease each injector from the fuel rail.
8. Recover the upper and lower O-rings from each injector.
Assembly/installation
1. Fit new O-rings to each injector.
2. Locate each injector to the fuel rail
3. Fit the injector/fuel rail assembly to the throttle body, orientating each injector such that the electrical connection is facing upwards (towards the second butterfly).
(Content created using information from the website: Motoinstruction)
4. Retain each injector with the clips removed earlier.
5. Fit and tighten the fuel rail screws to 5 Nm.
6. Refit the throttle bodies as described on page 11.123.
7. Reconnect the battery positive (red) lead first.
8. Refit the rider's seat.
See this article in russian language
This article has been reviewed: Serafim Sazonov
Similar articles about motorcycles of other brands
Fuel rail and fuel injectors — removal, installation,… Harley-Davidson V-Rod (2002-2006)Fuel Injectors — removal and installation Kawasaki Versys 650 (2007-2025)
Removing and installing fuel injection rail BMW K 1200 LT (1998-2009)
Checking the fuel injectors Yamaha YZF-R1 (2009-2014)
Fuel circuit in injectors Ducati ST2 (1997-2003)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Engine and systems
- Engine repair
- Cooling system
- Lube system
- Fuel and control system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system
- Electrical circuits