Removal
1. Remove the rider's seat as described on page 17.9.
2. Disconnect the battery negative (black) lead first.
3. Pivot the took kit upwards to gain access to the top of the air box.
4. Release the four screws securing the air filter cover to the airbox.
![](https://motoinstruction.ru/img/triumph/7/114485.jpg)
1. Air filter cover; 2. Airbox
5. Raise the filter cover to detach the air filter element from the housing.
![](https://motoinstruction.ru/img/triumph/7/114486.jpg)
1. Filter element
6. Inspect the cover seal for damage.
Assembly
1. Clean the air filter cover and interior of the airbox.
2. Locate the new filter element to the airbox.
3. Refit (or replace if necessary) the cover seal, fit the filter cover and tighten the screws to 3 Nm.
4. Reconnect the battery, positive (red) lead first.
5. Place the tool kit in its installed position on the frame.
6. Refit the rider's seat as described on page 17.9.