Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
Note: Note the routing of the harness and its retaining clips for installation.
1. Detach the rear ABS wheel speed sensor multiplug from its bracket on the crankcase breather cover and disconnect from the main harness.
![](https://motoinstruction.ru/img/triumph/15/121772.jpg)
1. Rear ABS wheel speed sensor multiplug; 2. Bracket
2. Release the sensor harness from its retaining clips and the rear caliper bleed screw cap.
3. Release the fixing and remove the sensor. Collect the shim from between the sensor and fork leg and discard the fixing.
![](https://motoinstruction.ru/img/triumph/15/121773.jpg)
1. Fixing; 2. Rear ABS wheel speed sensor