Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
1. Refit the flanged sleeves into the holes on the rear subframe cross member as noted during removal.
Note: Route the rear direction indicator harness as noted for removal.
2. With the mounting plate and the seal positioned as noted for removal, fit the rear direction indicator hanger and tighten its fixings to 8 Nm.
3. Connect the electrical connector for the rear direction indicators.
1. Electrical connector; 2. Fixings and flanged sleeves; 3. Rear direction indicator hanger
Perform the following operations:
Note: Check the operation of the rear direction indicators and license plate light. Rectify any faults as necessary.