![](https://motoinstruction.ru/img/triumph/15/121674.jpg)
1. Upper drive chain rubbing strip; 2. Fixing; 3. Fir tree clip
2. Remove the fixing and remove the lower drive chain rubbing strip.
![](https://motoinstruction.ru/img/triumph/15/121675.jpg)
1. Lower drive chain rubbing strip; 2. Fixing
3. Remove the bearing sleeve and outer seal from the left hand side.
4. Remove the spacer and seal from the right hand side.
5. Release the circlip and remove the two ball bearings by drifting through from the left.
6. Remove the spacer tube.
Note: The needle roller bearing and inner seal in the left hand side of the swinging arm cannot be removed undamaged.
7. Remove the inner seal and needle roller bearing by drifting through from the right.
![](https://motoinstruction.ru/img/triumph/15/121676.jpg)
1. Spacer; 2. Seal; 3. Circlip; 4. Ball bearings; 5. Spacer tube; 6. Inner seal; 7. Needle roller bearing; 8. Outer seal; 9. Sleeve