Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
Warning!
- When using a press, always wear overalls, eye, face and hand protection. Objects such as bearings frequently break-up under load and the debris caused during break-up may cause damage and injury to unprotected parts of the body.
- Never wear loose clothing, which could become trapped in the press and cause crushing injury to the hand, arms or other parts of the anatomy.
![](https://motoinstruction.ru/img/triumph/15/121665.jpg)
1. Rear suspension unit upper mounting; 2. Bush
Removal
1. Using a suitable press, remove the upper mounting bush.
Installation
Caution! When installing the upper mounting bush, ensure bush is pressed in by its outer sleeve. Pressing the bush in by its inner sleeves will cause irreparable damage to the bush.
Note: Ensure that the upper mounting bore is clean and free of debris before installing a new bush.
1. Install the new bush using a suitable press.
Perform the following operations: