2. Fit the three shouldered washers to the coolant expansion tank, as noted for removal.
3. Position the coolant expansion tank and its cover to the frame, as noted for removal. Fit the two new fixings and tighten to 6 Nm.
![](https://motoinstruction.ru/img/triumph/15/121578.jpg)
1. Fixings; 2. Coolant expansion tank; 3. Hose clip; 4. Bypass hose
4. Secure the coolant expansion tank cover to the cylinder head and tighten the new fixing to 6 Nm.
![](https://motoinstruction.ru/img/triumph/15/121579.jpg)
1. Fixing; 2. Coolant expansion tank cover
5. Top up the coolant level in the expansion tank (see Coolant replacement - filling).
Perform the following operations:
Water pump
Note: The oil pump and water pump are supplied as an assembly and cannot be separated. For additional information, refer to Oil Pump (see Oil pump - removal for removal and Oil pump - installation).