Item | Rated value | Unit of measurement/ specification |
Oil capacities | ||
Engine (with filter) | 2.3 (4.05/2.43) | Litres (Imp. pints/US quarts) Specification: see current Service Information |
Telescopic fork - for each post | 0.60 (1.06/0.63) | Litres (Imp. pints/US quarts) BMW telescopic fork oil |
Coolant | ||
Cooling system (entire) | 1.3 (2.29/1.37) | Litres (Imp. pints/US quarts) |
Expansion tank | 0.1 (0.18/0.11) | Litres (Imp. pints/US quarts) |
Composition: Water: 50% Antifreeze: 50% Antifreeze protection to -25°C (-13°F) | ||
Brake fluid | DOT 4 | |
Valve clearances. Measured cold (max. 35°C/95°F) | Inlet: | 0.10-0.15 (0.004-0.006), mm (in) |
Exhaust: 0.25-0.30 (0.010-0.012), mm (in) | ||
Spark plugs | NGK D8 EA | |
Electrode gap | 0.6...0.7 (0.02...0.03), mm (in) | |
Idle speed | 1350 +100 | rpm |
Clutch cable play | ||
Hand lever cable | 1.0 - 2.0 (0.004 - 0.008), mm (in) | |
Tyre pressure (on cold tyres) | front/rear | |
solo | 1.9/2.1 (27/30) | bar (psi) |
when fully loaded | 2.1/2.3 (30/33) | bar (psi) |
Tightening torques: | ||
Engine oil drain plug | 40 | Nm |
Engine water drain plug | 10 | Nm |
Oil tank drain plug | 21 | Nm |
Oil filter cap | 10 | Nm |
Valve cap | 10 | Nm |
Camshaft bracket | 10 | Nm |
Spark plug | 20 | Nm |
Telescopic fork oil drain plug | 6 | Nm |
Round nut, steering bearing | 25 | Nm |
Steering bearing locking tube | 65 | Nm |
Flanged nut on locking tube | 65 | Nm |
Fork stabilizer clamping screws | 21 | Nm |
Front quick-release axle | 80 | Nm |
Clamping screws for front quick-release axle | 21 | Nm |
Rear quick-release axle | 100 | Nm |
Brake caliper at fork slider tube | 41 | Nm |
Swinging arm bearings | 100 | Nm |
Deflection lever/frame | 50 | Nm |
Deflection lever/spring strut | 47 | Nm |
Deflection lever/tension strut | 71 | Nm |
Swinging fork/tension strut | 41 | Nm |