Place the bike on a service stand so that the rear wheel is clear of the ground.
Unscrew and remove the whell retaining nut (1) on the right-hand side of the swingarm.
Loosen the screws (4) to slacken the chain.
Withdraw the axle (2) with the nut (1) from he left-hand side.
Caution! During this operation, support the wheel so that it cannot fall when the axle (2) is removed.
Push the wheel forward so as to be able to unhook the chain from the rear sprocket.
Remove the rear wheel from the motorcycle, taking care not to hit the brake caliper mounting bracket, which is just resting on the swingarm, with the brake disc (11); if necessary, secure the mounting bracket to the swingarm with a tie to keep it out of the way.
Recover the spacer (10) on the sprocket side.
The wheel is removed complete with the sprocket flange.