Overhauling the rear brake disc
Unscrew and remove the six screws (12) securing the brake disc (11) to the axle (2).
Remove the rear brake disc (11).
The disc must be perfectly clean with no signs of rust, oil or grease deposits or other contaminants and must be free of any deep scoring.
Refer to Hydraulic brakes for the brake disc wear tolerance limits.
Apply threadlocker to the screws (12).
Refit the brake disc (11) and tighten the screws (12) to the specified torque (Frame torque settings).
The cush drive bushes (9) may be removed and renewed, if necessary.
![](https://motoinstruction.ru/img/ducati/18/123949.jpg)
![](https://motoinstruction.ru/img/ducati/18/123950.jpg)
![](https://motoinstruction.ru/img/ducati/18/123951.jpg)