Removing
1. With an angle grinder, carefully cut off the two chain link rivets. Disconnect the chain and remove it from the motorcycle.
Installation
1. Install a new chain on the sprockets.
2. We put the lower o-rings on the lock link and install it on the free end of the chain.
3. Similarly, install the second end of the chain on the lock link.
4. Install the top o-rings.
5. Install the top plate of the lock link.
6. With adjustable pliers, we compress the lock link until grooves appear on the axles.
7. We install the latch on the lock link so that it enters the grooves on the axles and is located as shown in the photo (the arrow shows the direction of movement of the chain).
When installing a one-piece chain, it is necessary to remove the rear suspension swingarm (see «Rear suspension pendulum - check, removal and installation»).
After the chain is installed, tighten it and lubricate it (see «Drive chain - check, tension adjustment and lubrication»).