![](https://motoinstruction.ru/img/honda/9/115644.jpg)
Connect the water hose and tighten the band screw securely.
![](https://motoinstruction.ru/img/honda/9/115645.jpg)
Connect the throttle cables to the throttle drum.
![](https://motoinstruction.ru/img/honda/9/115646.jpg)
Install the throttle body and clamp.
Tighten the bolts securely.
Install the sub-harness to the clamp.
![](https://motoinstruction.ru/img/honda/9/115647.jpg)
Connect the water hose and tighten the band screw securely.
![](https://motoinstruction.ru/img/honda/9/115648.jpg)
Connect the TP sensor 3P gray connector and MAP sensor 3P black connector.
![](https://motoinstruction.ru/img/honda/9/115649.jpg)
Install the throttle stop screw to the guide.
![](https://motoinstruction.ru/img/honda/9/115650.jpg)
Install the following:
Fill the cooling system with the recommended coolant and bleed any air. (page 6-5).