Disconnect the fuel pump 3P black connector.
Open and support the rear end of the fuel tank (page 3-4).
Notice. Do not apply excessive force to the fuel pipe.
Disconnect the fuel tank breather from the fuel tank.
Disconnect the fuel return hose from the pressure regulator and drain the fuel.
Remove the fuel hose sealing nut, sealing washers and fuel hose.
Close the fuel tank and drain the fuel from the fuel tank.
Remove the fuel tank from the frame.
Installation is in the reverse order of removal.
Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft).
Always replace the sealing washers when the fuel hose banjo bolt is removed or loosened.