Inspection Flow Chart
![](https://motoinstruction.ru/img/kawasaki/23/128325.jpg)
FI Indicator Light (LED) Inspection
- Remove the meter unit (See Meter Unit Removal in the Electrical System chapter).
- Using two auxiliary leads, supply battery power to the FI indicator light (LED) [A].
- 12 V Battery [B]
FI Indicator Light (LED) Check
- Connector: Meter Connector [C] (disconnected)
- Connection: W/BK Lead Terminal [1] of the Meter → Battery (+) Terminal
- BR/R Lead Terminal [16] of the Meter → Battery (-) Terminal
- Criterion: The light (LED) should light.
If the light (LED) does not go on, replace the meter unit (See Meter Unit Removal/Installation in the Electrical System chapter).
![](https://motoinstruction.ru/img/kawasaki/23/128326.jpg)
FI Indicator Light (LED) Circuit
![](https://motoinstruction.ru/img/kawasaki/23/128327.jpg)
1. ECU; 2. Water-proof Joint C; 3. Ignition Switch; 4. Meter Unit; 5. Ignition Fuse 10 A; 6. Main Fuse 30 A; 7. Battery; 8. Frame Ground; 9. Joint Connector