![](https://motoinstruction.ru/img/kawasaki/23/128624.jpg)
No. | Fastener | Torque | Remarks | ||
Nm | kgf·m | ft·lb | |||
1 | Breather Plate Bolts | 9.8 | 1.0 | 87 in·lb | L |
2 | Race Holder Screw | 4.9 | 0.50 | 43 in·lb | L |
3 | Connecting Rod Big End Nuts | see Text | ← | ← | |
4 | Crankcase Bolt (M8, L = 110 mm) | 27.5 | 2.8 | 20 | S |
5 | Crankcase Bolt (M6, L = 32 mm) | 19.6 | 2.0 | 14 | S |
6 | Crankcase Bolts (M6, L = 38 mm) | 19.6 | 2.0 | 14 | S |
7 | Crankcase Bolts (M6, L = 45 mm) | 19.6 | 2.0 | 14 | S |
8 | Crankcase Bolts (M8, L = 50 mm) | 27.5 | 2.8 | 20 | S |
9 | Crankcase Bolts (M8, L = 60 mm) | 35 | 3.6 | 26 | MO, S |
10 | Crankcase Bolts (M8, L = 73 mm) | 35 | 3.6 | 26 | MO, S |
11 | Crankcase Bolts (M9, L = 113 mm) | 44 | 4.5 | 32 | MO, S |
12 | Crankcase Bolts (M9, L = 83 mm) | 44 | 4.5 | 32 | MO, S |
13 | Upper Crankcase Bolt (M8, L = 120 mm) | 27.5 | 2.8 | 20 | S |
14 | Upper Crankcase Bolts (M8, L = 110 mm) | 27.5 | 2.8 | 20 | S |
15 | Oil Pipe Bolts | 9.8 | 1.0 | 87 in·lb | L |
16 | Oil Plate Bolts | 9.8 | 1.0 | 87 in·lb | L |
17 | Shift Shaft Return Spring Pin | 29 | 3.0 | 21 | L |
18 | Timing Rotor Bolt | 40 | 4.1 | 30 |
G: Apply grease.
L: Apply a non-permanent locking agent.
LG: Apply liquid gasket.
MO: Apply molybdenum disulfide oil solution (mixture of the engine oil and molybdenum disulfide grease in a weight ratio 10 : 1)
R: Replacement Parts
S: Follow the specified tightening sequence.
SS: Apply silicone sealant.
WL: Apply soap and water solution or rubber lubricant.
![](https://motoinstruction.ru/img/kawasaki/23/128625.jpg)
No. | Fastener | Torque | Remarks | ||
Nm | kgf·m | ft·lb | |||
1 | Drive Shaft Bearing Holder Screw | 4.9 | 0.50 | 43 in·lb | L |
2 | Gear Positioning Lever Bolt | 12 | 1.2 | 106 in·lb | L |
3 | Neutral Switch | 15 | 1.5 | 11 | |
4 | Neutral Switch Holder Screw | 4.9 | 0.50 | 43 in·lb | L |
5 | Oil Jet Nozzle | 2.9 | 0.30 | 26 in·lb | L |
6 | Shift Drum Bearing Holder Screws | 4.9 | 0.50 | 43 in·lb | L |
7 | Shift Drum Cam Bolt | 12 | 1.2 | 106 in·lb | L |
8 | Shift Lever Bolt | 12 | 1.2 | 106 in·lb | L |
9 | Shift Rod Plate Bolt | 9.8 | 1.0 | 87 in·lb | L |
10 | Shift Shaft Cover Bolts | 9.8 | 1.0 | 87 in·lb | L (3) |
11 | Shift Shaft Cover Screw | 4.9 | 0.50 | 43 in·lb | L |
12 | Transmission Case Bolts | 20 | 2.0 | 15 |
EO: Apply engine oil.
G: Apply grease.
L: Apply a non-permanent locking agent.
Lh: Left-hand Threads
MO: Apply molybdenum disulfide oil solution (mixture of the engine oil and molybdenum disulfide grease in a weight ratio 10 : 1)
R: Replacement Parts