Meter unit removal
Remove the bolt [A], and lift up the tail of the cover [B].
![](https://motoinstruction.ru/img/kawasaki/13/119584.jpg)
Push the cover forward a little, and remove the meter cover.
Remove the meter unit [A].
Pull out the meter unit end from the pin [B] on the fuel tank, and then pull out the front of the meter unit from the pins [C].
Slide the dust cover [D] out and disconnect the connector.
![](https://motoinstruction.ru/img/kawasaki/13/119585.jpg)
Caution! Never drop the meter unit, especially on a hard surface. Such a shock to the unit can damage it. Place the speedometer so that the face is up. If the meter is left upside down or sideways for any length of time, it will malfunction.
Meter unit installation
Confirm that the rubber dampers [A] are in the meter unit.
Connect the connector [B] and slide the dust cover [C] in.
Be sure to put the holes onto the pins on the fuel tank.
![](https://motoinstruction.ru/img/kawasaki/13/119586.jpg)
Install the meter cover.