![](https://motoinstruction.ru/img/suzuki/4/112958.jpg)
Troubleshooting
The starter does not rotate:
The gearbox is in neutral position. Turn the ignition key to position «Included». Squeeze the clutch lever. Listen for a click from the starter relay when you press the start button.
Click → Check whether the starter rotates when its terminal is connected to the positive terminal of the battery. (Do not use a thin wire as the starter consumes a lot of power).
Does not rotate → Starter is faulty.
Rotates → Faulty starter relay, loose or disconnected starter power wire.
No click:
Measure the voltage at the starter relay at the relay connector (between F/W (+) and B/W (-) wires), when you press the starter button. → No voltage:
- The ignition switch is faulty
- Starter button faulty
- Clutch lever position switch faulty
- The connection connector is faulty
- Break in electrical wiring
Voltage is:
Check the starter relay (6-13) → Faulty → Starter relay is faulty.
OK → Poor starter relay contact.
The engine does not turn over, although the starter turns → The starter overrunning clutch is faulty.