- Remove the exhaust pipe and muffler. (7-8)
- Remove the rear wheel. (9-34)
- Remove the final gear case. (4-15)
- Remove the under plate 1.
- Remove the regulator/rectifier 2.
- Remove the rear shock absorber front mounting bolt and nut.
- Remove the rear shock absorber rear mounting bolt and nut.
- Remove the rear shock absorber 3.
- Remove the cushion rod mounting bolt and nut 4.
Note: Slightly loosen the cushion lever mounting bolt or nut А to facilitate later disassembly.
- Remove the brake pipe guide bolts.
- Loosen the swingarm pivot pinch bolt 5.
- Loosen the swingarm pivot shaft with the special tool.
- 09944-28320: Hexagon socket
- Draw out the swingarm pivot shaft.
- Remove the rear suspension assembly.
- Remove the cushion rods 6 and cushion lever 7.
- Remove the rear fender 8.