Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
- Drain the cooling system (see Coolant replacement - drainage).
- Seat - removal
- Battery - removal
- Fuel tank - removal
- Airbox - removal
- Throttle bodies/injectors - removal
1. Press the wire locking device fully in and disconnect the harness from the coolant temperature sensor.
2. Remove the coolant temperature sensor.
![](https://motoinstruction.ru/img/triumph/15/121523.jpg)
1. Wire locking device; 2. Connector