Ambient air temperature sensor — installation (Triumph Street Triple 765 R/RS)
- Main
- Triumph
- Street Triple
- 765 R/RS [4]
- Engine and systems
- Fuel and control system
- Ambient air temperature sensor…
1. Fit the ambient air temperature sensor to the flyscreen. Tighten its fixing to 1.5 Nm.
1. Fixing; 2. Ambient air temperature sensor
2. Position the assembly to the motorcycle and reconnect the electrical connector for the ambient air temperature sensor.
3. Ensure that the flyscreen and air intake duct assembly is correctly positioned to the front subframe and secure with the fixing. Tighten the fixing to 3 Nm.
1. Flyscreen assembly; 2. Fixing
4. Fit the fascia panel to the front subframe ensuring that its locating lugs are fully inserted into the rubber grommets. Secure with the two fixings and tighten to 3 Nm.
1. Fascia panel; 2. Locating lugs; 3. Rubber grommets; 4. Fixings
Perform the following operations:
1. Fixing; 2. Ambient air temperature sensor
2. Position the assembly to the motorcycle and reconnect the electrical connector for the ambient air temperature sensor.
3. Ensure that the flyscreen and air intake duct assembly is correctly positioned to the front subframe and secure with the fixing. Tighten the fixing to 3 Nm.
1. Flyscreen assembly; 2. Fixing
4. Fit the fascia panel to the front subframe ensuring that its locating lugs are fully inserted into the rubber grommets. Secure with the two fixings and tighten to 3 Nm.
1. Fascia panel; 2. Locating lugs; 3. Rubber grommets; 4. Fixings
Perform the following operations:
See this article in russian language
This article has been reviewed: Kirill Prokofiev
Similar articles about motorcycles of other brands
Ambient Air Temperature Sensor Inspection Suzuki 1000A/XA V-Strom (2014-2019)Radiator fan switch, water temperature sensor — removal and… Kawasaki ZX6R/ZX600J (2000-2002)
Checking the coolant temperature sensor Yamaha FZ1 Fazer (2006-2015)
Coolant Temperature Sensor — Removal and Installation Honda CB 400 SF (1992-1999)
Intake air temperature sensor: IAT — removal and… Harley-Davidson V-Rod (2002-2006)
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Engine and systems
- Engine repair
- Fuel and control system
- Lubrication system
- Cooling system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system
- Electrical circuits