Removing and installing left and right handlebar levers (BMW K1200LT)

0

Caution: Pivot screw (3) is secured with thread-locking compound.

Note: Note springs (4).

• Remove pivot screw (3) from lever and remove lever.
• When installing, apply Loctite 2701 to pivot screw (3) and tighten.

Tightening torques:

Pivot screw (clean thread + Loctite 2701) — 5 Nm

Removing and installing throttle cables

See Group 13.

See this article in russian language

Removing and installing handlebar Harley Street 500 (2014-2021)
Removing handlebar Yamaha YZF-R1 (2009-2014)
Removing and installing the valves Kawasaki Versys 650 (2007-2025)
Front Brake Disc — Checking, Removing and Installing Honda CB 400 SF (1992-1999)
Removing the left-hand light dip switch Aprilia RS 125/3 (1998-2005)

Article about repair motorcycles «BMW K-series K 1200 LT» (1998-2009): «Removing and installing left and right handlebar levers»: https://motoinstruction.ru/en/BMW/K/K1200LT/chassis/handlebar/115817 <a href="https://motoinstruction.ru/en/BMW/K/K1200LT/chassis/handlebar/115817">Removing and installing left and right handlebar levers</a> - article about repair motorcycles «BMW K-series K 1200 LT» (1998-2009) from section «Handlebar». [url=https://motoinstruction.ru/en/BMW/K/K1200LT/chassis/handlebar/115817]Removing and installing left and right handlebar levers[/url] - article about repair motorcycles «BMW K-series K 1200 LT» (1998-2009) from section «Handlebar».