General
| Reference | Technical specifications | |
| Motorcycle dimensions | Total length | 2058 mm |
| Total width | 784 mm | |
| Total height | 1012 mm | |
| Wheelbase | 1452 mm | |
| Height of handlebar grip from ground | 960 mm | |
| Seat height | 770 mm | |
| Front footrest height | 334 mm | |
| Rear footrest height | 507 mm | |
| Minimum ground clearance | 117 mm | |
| Dry weight in riding order without fuel: | 161 kg | |
| Weight without liquids and battery | 172 kg | |
| Weight fully laden | No greater than 390 kg | |
| Frame | Type | Chromium-molybdenum tubular trellis frame |
| Subframe | Type | Cast aluminium |
| Steering head angle | 22.8° | |
| Steering angle | 32° | |
| Trail | 87 mm | |
| Front wheel | Light alloy, with three spokes | |
| Front wheel size | MT 3.50x17" | |
| Front tyre size | 120/60 - ZR 17 | |
| Rear wheel | Light alloy, three spokes with cush drive dampers | |
| Rear wheel size | MT 4.50x17" | |
| Rear tyre size | 160/60 - ZR 17 | |
| Type of tyre | Radial tubeless tyres | |
| Front brake | Hydraulic with 2 calipers | |
| Rear brake | Hydraulic with 1 caliper | |
| Engine | Type | Longitudinal 90º "L" twin cylinder, four-stroke. |
| Bore | 88 mm | |
| Stroke | 57.2 mm | |
| Displacement | 696 cm³ | |
| Compression ratio | 10.7±0.5:1 | |
| Timing system | With toothed belt, single overhead camshaft, 2 valves per cylinder and 4 rocker arms. | |
| Lubrication system | Pump-forced | |
| Oil pump type | Gear pump with bypass valve | |
| Cooling system | Air-cooled | |
| Air filter | Filter element in the airbox | |
| Crankshaft type | One-piece |
Colours
| Description | Code | |
| Ducati Anniversary Red Transparent Red frame with black wheels | 473.101 (PPG) 228.880 (PPG) | |
| Matt black Transparent Matt black frame with black wheels | 291.501 (PPG) 228.880 (PPG) | |
| Pearl white Transparent Matt black frame with black wheels | 490.019 (PPG) 228.880 (PPG) |
Transmission
| Reference | Technical specifications | ||
| Clutch | APTC wet multiplate | ||
| Clutch control | Hydraulic | ||
| Gearbox | 6 speed | ||
| Primary drive | 33/61 | ||
| Transmission ratio | 1.85 | ||
| Final drive | 15/45 | ||
| Gearbox type | With constant mesh spur gears, operated by a lever on the left side of the motorcycle | ||
| Gear ratios | |||
| 1st | 13/32 | ||
| 2nd | 18/30 | ||
| 3rd | 21/28 | ||
| 4th | 23/26 | ||
| 5th | 22/22 | ||
| 6th | 26/24 | ||
Timing system/valves
| Reference | Adjusting clearance | Checking clearance | |
| Timing diagram | With 1 mm valve clearance | ||
| Intake | Opening 18° B.T.D.C. Closing 60° A.B.D.C. | ||
| Exhaust system | Opening 53° B.B.D.C. Closing 23° A.T.D.C. | ||
| Intake valve diameter | 44 mm | ||
| Exhaust valve diameter | 38.5 mm | ||
| Valve lift | With 0 mm valve clearance | Intake 11.20 mm Exhaust 10.80 mm | |
| Opening rocker arm - intake | 0.10 to 0.15 mm | 0.05 to 0.15 mm | |
| Opening rocker arm - exhaust | 0.10 to 0.15 mm | 0.05 to 0.15 mm | |
| Closing rocker arm - intake | 0 to 0.05 mm | 0 to 0.20 mm | |
| Closing rocker arm - exhaust | 0 to 0.05 mm | 0 to 0.20 mm | |
| Timing belt tensioning | DDS | 140±5 Hz (horizontal) 140±5 Hz (vertical) | 140±5 Hz (horizontal) 140±5 Hz (vertical) |
| Minimum limit value | 70 Hz | 70 Hz |
Cylinder/Piston
| Reference | Standard value | Service limit | |
| Cylinder barrel | Max. bore ovality | 0.03 mm | |
| Max. bore taper | 0.03 mm | ||
| Nominal diameter Class A Class B Class C | 88 mm 88.000 to 88.010 mm 88.010 to 88.020 mm 88.020 to 88.030 mm | ||
| Piston-to-cylinder bore clearance | 0.025 to 0.045 mm | ||
| Piston | Nominal diameter Class A Class B Class C | 88 mm 87.965 to 87.975 mm 87.975 to 87.985 mm 87.985 to 87.995 mm | |
| Connecting rod | Connecting-rod big-end diameter | 43.67 mm | |
| Big-end bearing-to-crankpin clearance | Ø 40.017 mm/0 to 0.016 mm | ||
| Gudgeon pin–to-piston clearance | 0.015 to 0.058 mm | ||
| Nominal diameters | Ø 18 mm | ||
| Piston | Ø 18 mm/0.020 to 0.015 | ||
| Gudgeon pin | Ø 18 mm/0 to 0.004 | ||
| Gudgeon pin-to-connecting rod clearance | 0.006 to 0.028 mm | ||
| Cylinder compression | Standard Minimum Max. permissible difference | 11 to 13 bar | min 10 bar max 2 bar |
Gearbox
| Reference | Standard value | Service limit | |
| Gearbox shafts | Endfloat | 0.05 to 0.020 mm | |
| Selector drum | Endfloat | 0.10 to 0.040 mm | |
| Gear selector fork | Selector fork end thickness | 3.90 to 4.00 mm | |
| Selector fork-to-gear clearance | 0.070 to 0.285 mm | 0.4 mm |
Cooling system
| Reference | Technical specifications | |
| Type | Air-cooled: heat dispersion through the extensive finning on the two cylinder barrel/head assemblies |
Front wheel
| Reference | Standard value | Service limit | |
| Minimum tread depth | In the most worn part | 2 mm | |
| Tyre pressure | Cold | 2.1 - 2.3 bar | |
| Axle runout | On 100 mm | 0.05 mm | |
| Wheel rim runout | Radial | 1 mm (0.04 inc.) | |
| Lateral | 0.5 mm (0.02 inc.) |
Front suspension
| Reference | Technical specifications | |
| Type | SHOWA: 43 mm Ø upside-down hydraulic fork, non-adjustable | |
| Fork travel | 120 mm | |
| Fork | Not adjustable. | |
| Oil charge per leg | 538±2.5 cm³ (per leg) |
Rear wheel
| Reference | Standard value | Service limit | |
| Minimum tread depth | In the most worn part | 2 mm | |
| Tyre pressure | Cold | 2.2 - 2.4 bar | |
| Swingarm pivot shaft runout | On 100 mm | 0.2 mm | |
| Wheel rim runout | Radial | 1 mm (0.04 inc.) | |
| Lateral | 0.5 mm (0.02 inc.) | ||
| Chain | Make Type | D.I.D. 520 V6 | |
| Dimensions | 5/8" x 1/4" | ||
| No. of links | 107 + 1 open |
Rear suspension
| Reference | Technical specifications | |
| Type | SACHS: progressive monoshock with adjustable rebound, compression and spring preload. | |
| Shock absorber | Stroke | 59.5 mm |
| Hydraulic damping standard setting. Turn the adjusters fully clockwise until they stop, then turn them anticlockwise | Rebound: 8 clicks | |
| Standard preloaded spring length | 150±1 mm | |
| Wheel travel | 148 mm |
Hydraulic brakes
| Reference | Standard value | Service limit | |
| FRONT | |||
| Brake disc | Type | Drilled dual disc | |
| Shim | 4 mm | 3.6 mm (min.) | |
| Flange material | Steel | ||
| Braking surface material | Steel | ||
| Diameter | 320 mm | ||
| Braking surface | 44 cm² (per disc) | ||
| Brake caliper | Make | Brembo | |
| Type | P4.32K - 4 piston | ||
| Caliper cylinder diameter | 32 mm | ||
| Pad friction material | FERIT I/D 450-FF | ||
| Brake master cylinder | Type | PS 15 | |
| Master cylinder diameter | 15 mm | ||
| REAR | |||
| Brake disc | Type | Drilled disc | |
| Shim | 5 mm | 4.5 mm (min.) | |
| Material | Steel | ||
| Diameter | 245 mm | ||
| Braking surface | 25 cm² | ||
| Brake caliper | Make | Brembo | |
| Type | P34C - 2 pistons | ||
| Caliper cylinder diameter | 34 mm | ||
| Pad friction material | FERIT I/D 450 FF | ||
| Brake master cylinder | Type | PS11 | |
| Master cylinder diameter | 11 mm | ||
Charging system/alternator
| Reference | Technical specifications | |
| Battery | Voltage | 12 V |
| Charge | 10 Ah | |
| Type | Sealed, maintenance free | |
| Alternator | Capacity | 12 V - 480 W |
Ignition system
| Reference | Technical specifications | |
| Ignition | Type | Siemens electronic injection |
| Starting | Type | Electric starter motor, 12 V - 0.7 kW. |
| Spark plugs | Make and type | NGK DCPR8E (alternative CHAMPION RA6HC) |
| Electrode gap | 0.7 to 0.8 mm |
Fuel system
| Make | Type | |
| Unleaded fuel | 95-98 RON | |
| Throttle body | Ø 45 mm | |
| Injectors per cylinder | 1 | |
| Holes per injector | 8 |
Injection system
| Make | Type | |
| Electronic Control Unit | Siemens | M3C |
Lights/instrument panel
| Reference | Technical specifications | |
| Bulbs | Front headlight (low beam/high beam) | H7 (12 V - 55 W) |
| Number plate light | C5W (12 V - 5 W) | |
| Side light | H6 (12 V - 6 W) | |
| Turn signal light | RY10W (12 V - 10 W) | |
| Tail light and brake light: | LED | |
| Fuses | Regulator | 30 A |
| Instrument panel | 5 A | |
| Injection | 20 A | |
| Key ON | 10 A | |
| ECU | 5 A | |
| Devices | 15 A | |
| High beam and low beam headlights, parking lights | 15 A | |
| Spare | 20 A | |
| Spare | 5 A |