Prepare
1. Remove seat. See Removing and installing seat.
2. Disconnect negative battery cable. See Power disconnect.
Remove
1. See Figure 8-6. Disconnect starter solenoid connector (5).
2. Remove battery and starter cables.
- a. Remove cover (1).
- b. Remove locknuts (2).
- c. Remove washers (8).
- d. Remove starter cable (3) and battery cable (7).
3. Remove starter solenoid.
- a. Remove screws (4).
- b. Remove starter solenoid (6).
Install
FASTENER | TORQUE VALUE | |
Starter relay screws | 2.3-3.3 Nm | 21-29 in·lbs |
Starter relay terminal locknuts | 6.0-10.0 Nm | 54-88 in·lbs |
1. See Figure 8-6. Install starter solenoid.
- a. Install starter solenoid (6).
- b. Install screws (4). Tighten to 2.3-3.3 Nm (21-29 in·lbs).
2. Install battery and starter cables.
- a. Install starter cable (3) and battery cable (7).
- b. Install washers (8).
- c. Install locknuts (2). Tighten to 6.0-10.0 Nm (54-88 in·lbs).
- d. Install cover (1).
3. Connect starter solenoid connector (5).
![](https://motoinstruction.ru/img/harley/22/127888.jpg)
Figure 8-6. Starter Solenoid: 1. Cover; 2. Locknut (2); 3. Starter cable; 4. Screw (2); 5. Starter solenoid connector; 6. Starter solenoid; 7. Battery cable; 8. Washer (2)
Complete
1. Install seat. See Removing and installing seat.
2. Connect negative battery cable. See Power disconnect.