Prepare
1. Remove main fuse. See Power disconnect.
2. Remove radiator shroud. See Removing and installing radiator.
Remove
Voltage Regulator
1. See Figure 8-8. Remove voltage regulator.
- a. Disconnect voltage regulator connectors (5, 6).
- b. Remove voltage regulator screws (1).
- c. Remove voltage regulator (2).
Voltage Regulator Bracket
1. See Figure 8-8. Remove voltage regulator bracket.
- a. Remove bracket screws (3).
- b. Remove bracket (4).
Install
FASTENER | TORQUE VALUE | |
Voltage regulator bracket screws | 22.5-27.5 Nm | 17-20 ft·lbs |
Voltage regulator screws | 9.0-11.0 Nm | 80-97 in·lbs |
Voltage Regulator Bracket
1. See Figure 8-8. Install voltage regulator bracket.
- a. Install bracket (4).
- b. Install bracket screws (3). Tighten to 22.5-27.5 Nm (17-20 ft·lbs).
Voltage Regulator
1. See Figure 8-8. Install voltage regulator.
- a. Install voltage regulator (2).
- b. Install voltage regulator screws (1). Tighten to 9.0-11.0 Nm (80-97 in·lbs).
- c. Connect stator and voltage regulator connectors (5, 6).
![](https://motoinstruction.ru/img/harley/22/127890.jpg)
Figure 8-8. Voltage Regulator Assembly: 1. Voltage regulator screw (2); 2. Voltage regulator; 3. Bracket screw (2); 4. Bracket; 5. Stator connector; 6. Voltage regulator connector
Complete
1. Install radiator shroud. See Removing and installing radiator.
2. Install main fuse. See Power disconnect.