If the ABS indicator light (LED) [A] lights, it is normal.
If the ABS indicator light (LED) does not light, go to step "ABS Indicator Light (LED) is Unlit (When the Ignition Switch turned to ON)".
![](https://motoinstruction.ru/img/kawasaki/23/128874.jpg)
Turn the ignition switch OFF.
If the ABS indicator light (LED) [A] does not light, it is normal.
If the ABS indicator light (LED) lights, go to step "ABS Indicator Light (LED) Lights (When the Motorcycle is Running, - No Service Code)".
![](https://motoinstruction.ru/img/kawasaki/23/128875.jpg)
ABS Indicator Light (LED) is Unlit (When the Ignition Switch turned to ON)
Do the 1st step test.
Check the terminal voltage between the orange/black and black/yellow lead terminals of the meter connector [A].
Special Tool - Hand Tester: 57001-1394
Terminal Voltage
Standard: About 9 V
If the terminal voltage is not within the specification, 2nd step.
If the terminal voltage correct, replace the meter assembly.
Do the 2nd step test.
Disconnect the ABS hydraulic unit connector and meter connector.
Check for continuity between the orange/black lead terminal of the main harness side connector [A] and orange/black lead terminal of the main harness side connector [B].
![](https://motoinstruction.ru/img/kawasaki/23/128876.jpg)
If there is the continuity in the lead, 3rd step.
If there is not the continuity in the lead, replace or repair the main harness.
Do the 3rd step test.
Check the battery terminal voltage (see 2nd Step in the Power Supply Voltage Abnormal (Under-Voltage) (Service Code 52)).
If the battery terminal voltage correct, replace the ABS hydraulic unit.
![](https://motoinstruction.ru/img/kawasaki/23/128877.jpg)
ABS Indicator Light (LED) Lights (When the Motorcycle is Running, - No Service Code)
Do the 1st step test.
Check the terminal voltage between the orange/black and black/yellow lead terminals of the meter connector [A].
Special Tool - Hand Tester: 57001-1394
Terminal Voltage
Standard: About 9-12 V
If the terminal voltage is not within the specification, replace the meter assembly.
If the terminal voltage correct, 2nd step.
![](https://motoinstruction.ru/img/kawasaki/23/128878.jpg)
Do the 2nd step test.
Disconnect the ABS hydraulic unit connector.
Check the terminal voltage between the orange/black and black/yellow lead terminals of the main harness side connector [A].
Special Tool - Hand Tester: 57001-1394
If the terminal voltage is about 9-12 V, replace the main harness.
If the terminal voltage is 0 V, replace the ABS hydraulic unit.
![](https://motoinstruction.ru/img/kawasaki/23/128879.jpg)