Oil Pressure Switch Removal
- Drain the engine oil (See Engine Oil Change in the Periodic Maintenance chapter).
Remove:
- Right Lower Fairing (See Lower Fairing Removal in the Frame chapter)
- Switch Cover [A]
- Switch Terminal Bolt [B]
- Oil Pressure Switch [C]
![](https://motoinstruction.ru/img/kawasaki/23/128610.jpg)
Oil Pressure Switch Installation
- Apply silicone sealant to the threads of the oil pressure switch [A] and tighten it.
Sealant - Kawasaki Bond (Silicone Sealant): 56019-120
Torque - Oil Pressure Switch: 15 Nm (1.5 kgf·m, 11 ft·lb)
- Install the switch lead [B] direction downward.
- Apply grease to the terminal [C], and tighten the terminal bolt securely.
- Front [D]
![](https://motoinstruction.ru/img/kawasaki/23/128611.jpg)
Note: Apply a small amount grease to the terminal so that grease should not close two breather holes [A] for switch diaphragm.
![](https://motoinstruction.ru/img/kawasaki/23/128612.jpg)