Throttle Body Assy Holder Removal
Remove:
- Fuel Tank (See Fuel Tank Removal in the Fuel System (DFI) chapter)
- Air Cleaner Housing (See Air Cleaner Housing Removal in the Fuel System (DFI) chapter)
- Throttle Body Assy (See Throttle Body Assy Removal in the Fuel System (DFI) chapter)
- Clamps [A]
- Bolts [B]
- Throttle Body Assy Holders [C]
![](https://motoinstruction.ru/img/kawasaki/23/128535.jpg)
Throttle Body Assy Holder Installation
- Be sure to install the new O-rings [A].
- Apply grease to the new O-ring.
Tighten:
Torque - Throttle Body Assy Holder Bolts: 12 N·m (1.2 kgf·m, 106 in·lb)
- Install the clamps [B] so that their projections [C] fit on the holes of the holders.
Be sure that the clamp bolt heads [D] face outward.
- Upside View [E]
![](https://motoinstruction.ru/img/kawasaki/23/128536.jpg)