- Turn on the ignition switch.
- The brake light [A] should go on when the brake lever is applied or after the brake pedal is depressed about 10 mm (0.39 in.).
![](https://motoinstruction.ru/img/kawasaki/23/128124.jpg)
If it does not, adjust the brake light switch.
- Disconnect the connector [A].
- Turn the brake light switch to adjust the switch. Connect the connector.
![](https://motoinstruction.ru/img/kawasaki/23/128125.jpg)
- If it does not go on, inspect or replace the following items. Battery (See Charging Condition Inspection in the Electrical System chapter)
- Brake Light (See Tail/Brake Light Removal in the Electrical System chapter)
- Main Fuse 30 A and Taillight Fuse 10 A (See Fuse Inspection in the Electrical System chapter)
- Front Brake Light Switch [A] (See Switch Inspection in the Electrical System chapter)
- Rear Brake Light Switch (See Switch Inspection in the Electrical System chapter)
- Harness (See Wiring Inspection in the Electrical System chapter)
![](https://motoinstruction.ru/img/kawasaki/23/128126.jpg)