Gearshift shaft/gearshift arm disassembly
- Remove the following parts from the gearshift shaft/gearshift arm.
1. Washer; 2. Snap ring; 3. Gearshift shaft return spring; 4. Gearshift cam drive plate; 5. Plate return spring
Gearshift shaft/gearshift arm inspection
- Inspect the gearshift shaft/gearshift arm for wear or bend.
- Inspect the return springs for damage or fatigue.
- Replace the arm or spring if there is anything unusual.
Gearshift shaft/gearshift arm reassembly
- Install the following parts to the gearshift shaft/gearshift arm as shown in the illustration.
1. Washer; 2. Snap ring; 3. Gearshift shaft return spring; 4. Gearshift cam drive plate; 5. Plate return spring
Note: When installing the gearshift shaft return spring, position the stopper А of gearshift arm between the shaft return spring ends В.