- Apply SUZUKI SUPER GREASE "A" to the O-ring.
Note: Align the gear position switch pin А with the gearshift cam hole 2.
- 99000-25010: SUZUKI SUPER GREASE "A" or equivalent
- Install the gear position switch 3 as shown.
- Apply THREAD LOCK SUPER to the gear position switch bolts.
- 99000-32110: THREAD LOCK SUPER "1322" or equivalent
Note: Fit the gromet С.
- Hold the primary driven gear with the special tool and tighten its bolt to the specified torque.
- 09930-44541: Rotor holder
Primary driven gear bolt:
- 95 Nm (9.5 kgf·m, 68.5 lb·ft)