- Install the gearshift cam stopper 1, its bolt 2, washer 3 and return spring 4.
Note: Apply a small quantity of THREAD LOCK to the gearshift cam stopper bolt 2 and tighten its to the specified torque.
- 99000-32050: THREAD LOCK "1342" or equivalent
Gearshift cam stopper bolt:
- 10 N·m (1.0 kgf·m, 7.0 lb·ft)
Note: Hook the return spring end А to the stopper 5.
- Check the gearshift cam stopper moves smoothly.
- Install the gearshift cam stopper plate 6.
Note: Align the gearshift cam pin В with the gearshift cam stopper plate hole С.
- Apply a small quantity of THREAD LOCK to the gearshift cam stopper plate bolt and tighten its to the specified torque.
- 99000-32050: THREAD LOCK "1342" or equivalent
Gearshift cam stopper plate bolt:
- 13 Nm (1.3 kgf·m, 9.5 lb·ft)
- Install the gearshift shaft assembly 7 as shown.
Note: Set the return spring ends D to the gearshift arm stopper 8.