Disassembly
- Remove the clutch release arm 1, return spring 2 and washer 3.
- Pull out the oil seal 4, bearing 5 with the clutch release camshaft 6.
Caution: The removed oil seal and bearing must be replaced with new one.
- Remove the clutch push rod cap 7 and oil seal 8.
Caution: The removed oil seal must be replaced with new one.
Reassembly
- Apply SUZUKI SUPER GREASE "A" the release camshaft 1, new bearing 2 and oil seal 3 before installing.
- 99000-25010: SUZUKI SUPER GREASE "A" or equivalent
- Install the clutch release arm and tighten the bolt 1.
Note: Align the release arm punch mark А with the notch mark В on the release camshaft.
Water pump: 8-15.