Fault Code | Possible cause | Action |
P0130 | Lambda sensor circuit fault. | View & note «freeze frame» data if available. View & note «sensor» data. Ensure sensor connector is secure. Disconnect ECM and proceed to pinpoint test 1 |
Pinpoint tests
Test | Result | Action |
1 Check cable and terminal integrity: - ECM pin A11 - ECM pin A07 | OK | Disconnect lambda sensor and proceed to test 2 |
Faulty | Rectify fault, proceed to test 4 | |
2 Check cable for short circuit: - ECM pin A11 to ECM pin A07 - ECM pin A11 to ECM pin A20 | OK | Proceed to test 3 |
Short circuit | Locate and rectify wiring fault, proceed to test 4 | |
3 Check cable continuity: - ECM pin A11 to sensor pin 1 - ECM pin A11 to sensor pin 2 | OK | Proceed to test 4 |
Open circuit | Locate and rectify wiring fault, proceed to test 4 | |
4 Reconnect harness, clear fault code and run engine. Check adaptation status. | OK | Action complete - quit test |
Fault still present | Contact Triumph service |
Circuit diagram
![](https://motoinstruction.ru/img/triumph/7/114427.jpg)