Fault Code | Possible cause | Action |
P0705 | Gear position sensor circuit fault | View & note «freeze frame» data if available. View & note «sensor» data. Ensure sensor connector is secure. Disconnect ECM and proceed to pinpoint test 1 |
Pinpoint tests
Test | Result | Action |
1 Check cable and terminal integrity: - ECM pin A26 | OK | Disconnect sensor and proceed to test 2 |
Faulty | Rectify fault, proceed to test 5 | |
2 Check cable for short circuit: - ECM pin A26 to ground | OK | Proceed to test 3 |
Short circuit | Locate and rectify wiring fault, proceed to tests | |
3 Check cable continuity: - ECM pin A26 to sensor pin 1 - ECM pin A19 to sensor pin 2 | OK | Proceed to test 4 |
Open circuit | Locate and rectify wiring fault, proceed to test 5 | |
4 Check cable for short circuit: - Sensor pin 1 to sensor pin 2 | OK | Renew gear position sensor and contact pin and proceed to test 5 |
Short circuit | Locate and rectify wiring fault, proceed to tests | |
5 Reconnect harness, clear fault code. | OK | Action complete, quit test |
Fault still present | Contact Triumph service |
Circuit diagram
![](https://motoinstruction.ru/img/triumph/7/114435.jpg)