Pinpoint tests
Pin point tests, if used correctly, help to diagnose a fault in the system once a diagnostic trouble code has been stored.
Before starting pinpoint tests:
1. Delete the stored DTCs.
2. Switch the ignition OFF and ON.
3. Ride the motorcycle at a road speed in excess of 30 km/h. If the DTC is repeated, proceed to the relevant pinpoint test.
After completion of pinpoint tests:
1. Delete the stored DTCs.
2. Switch the ignition OFF and ON.
3. Ride the motorcycle at a road speed in excess of 30 km/h. If the DTC is repeated, proceed to the relevant pinpoint test.
4. If a DTC is stored, there is a further fault. Read the stored DTC and refer to the relevant pinpoint test.