Place motorcycle on its centre stand.
Remove seat.
Disconnect the fuel hose from roll-over valve (3).
Disconnect the activated charcoal filter from fuel evaporation control valve (4).
Raise the rear frame. See Group 46.
Remove the securing screw from the underside of the holder for the activated charcoal filter.
Pull the holder complete with the activated charcoal filter down to remove.
Open the holder and remove the activated charcoal filter.
Installation is the reverse of the removal procedure.
Tightening torques:
- Rear frame to main frame: 21 Nm
- Brake fluid reservoir to rear frame: 5 Nm
- Clamp for silencer: 55 Nm
- Oxygen sensor to exhaust: 45 Nm
- Exhaust manifold to cylinder head: 20 Nm
- Engine guard to frame: 9 Nm