Removing and installing fuel-evaporation control valve (BMW F650GS)

0

[USA version]

Place motorcycle on its centre stand.

Remove seat.

Remove the BMS control unit from the holder.



Disconnect plug (1) from fuel-evaporation control valve.

Disconnect the activated charcoal filter from fuelevaporation control valve (2).

(Information copied from this resource: motoinstruction.ru)

Disconnect the breather hose from the throttle flap stub to the fuel-evaporation control valve.

Remove the fuel-evaporation control valve.

Installation is the reverse of the removal procedure.

See this article in russian language

«C49» PAIR control solenoid valve circuit malfunction Suzuki V-Strom DL-650 (2004-2011)
Purge control valve (if fitted) — removal Triumph Street Triple 765 (2017-2024)
Removing the fuel pump Yamaha FZ1 Fazer (2006-2015)
Fuel cut valve — inspection Kawasaki ZX6R/ZX600J (2000-2002)
Front Brake Disc — Checking, Removing and Installing Honda CB 400 SF (1992-1999)

Article about repair motorcycles «BMW F-series F 650 GS» (2000-2007): «Removing and installing fuel-evaporation control valve»: https://motoinstruction.ru/en/BMW/F/F650GS/engine/fuel/112619 <a href="https://motoinstruction.ru/en/BMW/F/F650GS/engine/fuel/112619">Removing and installing fuel-evaporation control valve</a> - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Fuel and exhaust systems». [url=https://motoinstruction.ru/en/BMW/F/F650GS/engine/fuel/112619]Removing and installing fuel-evaporation control valve[/url] - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Fuel and exhaust systems».