Operation | Section reference |
Drain the engine oil | Changing the engine oil and filter cartridge |
Remove the clutch-side crankcase cover | Removal of the clutch-side crankcase cover |
Screw the three tools 88713.2591 into the relative bores in the hub.
![](https://motoinstruction.ru/img/ducati/18/124475.jpg)
Unscrew the retaining screws (1) and remove the collars (2) and the clutch springs (4).
![](https://motoinstruction.ru/img/ducati/18/124476.jpg)
Remove the pressure plate (5) with the clutch control pin (3). If necessary, using a drift of suitable diameter, remove the bearing (6) installed on the inner side of the pressure plate (5).
![](https://motoinstruction.ru/img/ducati/18/124477.jpg)
Hold the clutch drum with the service tool no. 88713.2556 and unscrew the nut (8).
![](https://motoinstruction.ru/img/ducati/18/124478.jpg)
![](https://motoinstruction.ru/img/ducati/18/124479.jpg)
Remove the washer (9).
![](https://motoinstruction.ru/img/ducati/18/124480.jpg)
Withdraw the clutch hub-plates-centre assembly (B) from the clutch drum (A), marking the components so as to be able to install them in the same position.
![](https://motoinstruction.ru/img/ducati/18/124481.jpg)
Remove the spacer (11) from the clutch drum (A).
![](https://motoinstruction.ru/img/ducati/18/124482.jpg)